Electronic Mouse Trap AND POBD-I-01 Original Electronic Pest Repeller

Electronic Mouse Trap AND POBD-I-01 Original Electronic Pest Repeller

Electronic Mouse Trap AND POBD-I-01 Original Electronic Pest Repeller

Remember this is based upon the amount of wiring actually IN the structure, so it would only work where it has some wiring in the walls, if you only have one jack or two it may only be working in the vicinity of that jack. You can use an EMF detector to see where it actually works, you can get a cheap one from home depot for 30$

The problem with most houses is poor wiring, one room may be a combination of two circuits, if you turn off that section of wiring using the circuit breaker you will see what I mean. I would use a small lamp, then flip the jumper off and watch which one turns off. Then place one Pest-offense on that circuit, do the same thing with each room or section of your house.. Older houses have bad wiring, so you may only have 1 to 2 circuits per section of the house, so only one device would be needed in that case. In newer homes they have several circuits around the house, generally 1 to 2 circuits per room. This is actually to keep your house from burning down by overloading the circuit breaker.

READ MORE
Electronic Mouse Trap AND POBD-I-01 Original Electronic Pest Repeller